8" relined, shoe measures 32mm wide,axle set, exchange, 1957-on,
Parts
8" drum exchange relined item. 55-57, exchange item
Brake pull off spring used front on 7" brake drums. overall length 94mm, 12.2mm diameter, 4 required per axle.
Brake pull off return spring, used front . overall length 94mm, 14.6mm diameter, 4 piece required per axle.
Snail cam adjuster, for applications with girling brakes. Girling part ref GA9 / 64271022 also applicable to Cortina Mk1 1200, Escort Mk1, Triumph Herald, Reliant, Vauxhall Viva HA, HB and HC and...
Re-manufactured right hand front wheel cylinder 53-57, aluminium body with slot piston, 3/4" bore, Girling part 390311, also fits Isetta and Standard 8.
Re-manufactured left hand front wheel cylinder 53-57, aluminium body with slot piston, 3/4" bore, Girling part 390310, also fits Isetta and Standard 8.
Rear brake hand brake operating lever with pivot pin for 8" brakes, fitted 02/57 to 07.62.
'55 onwards, axle set, suits cross head piston and later flat top. Girling reference SP 2027
Application - brake and clutch, note the connecting rod will require changing for the original on vehicle, depending on application.
Replacement bleed nipple for brake slave cylinders, 3/8" UNF thread
8" drum, relined, shoe measures 32mm wide, exchange item, 1957-. axle set,
53-55, rear wheel cylinder for 7" brakes, alloy body, slot end to piston
Fits Standard 8 and 10 (1953 - 1957)
Fits Standard 8 and 10 (1953 - 1957)
55-57, rear wheel cylinder for 8" brakes, alloy body, cross head to piston
57-, alloy body, plain end to piston. used later 100E/300E, all 107E and 1198cc 105E/307E models. Girling ref 64673476. also applicble to Escort Mk1 and Cortina Mk1
Complete inner and outer hand brake cable for the 100E range. The cable has two outer sleeves/conduit with a exposed inner cable in the centre, the exposed cable fits into the handbrake equaliser...
Rear brake shoe pull off return spring, with coil at each end. used 02/57 to 07/62.
Dimensions 112mm overall, long coil 45mm, short coil 30mm, spring coil 8mm in diameter.
Dimensions 112mm overall, long coil 45mm, short coil 30mm, spring coil 8mm in diameter.
Rear brake shoe pull off return spring set. Comprises 1 axle set - 4 springs. 2 off 100E-2297 and 2 off 100E-2296-B
Rear brake pull return spring, overall length 89mm, 9.4mm diameter,
Replacement rubber for clutch or brake pedal, 50mm wide x 71mm height
Brake and Clutch pedal shaft oilite bush.
Dimension 19mm long, 19.2mm o/d, 15.9mm i/d.
Dimension 19mm long, 19.2mm o/d, 15.9mm i/d.
Brake and clutch pedal return spring. Dimensions :- overall length 75mm, short leg 17mm, long leg 30mm, coiled section 25mm long x 20mm diameter.
Brake and clutch pedal shaft snap ring, secures pedals onto pedal shaft. Square section clip (2.3mm x 2.3mm) 30mm tall x 19mm wide, internal diameter 14mm (relaxed).
Handbrake lever rubber gaiter for 100E models (later type).
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
Early pattern rubber handbrake lever gaiter (wedge shape) slot type.
Dimensions :- 188mm x 90mm with four fixing screw holes, 43mm tall with 90mm slot.
Dimensions :- 188mm x 90mm with four fixing screw holes, 43mm tall with 90mm slot.
Part 100E-2663-C rubber inc wheel cylinder retaining plates E15-FB-1 & E15-FB-1 (one axle set)
Rear wheel brake cylinder, alloy body, plain end to piston, used on 105E 997cc models and Cortina Mk1, Girling ref 64673049
Copper brake pipe kit, to fit 105E/123E saloon models 1959-67, extra pipe supplied for 65-67 models that fits between rear junction and rear brake hose.
Copper brake pipe kit, to fit 105E/123E/307E/309E estate/van models 1961-67
Brake pedal rubber pad, 67mm tall, 55mm wide at top tapering down to 41mm.
Complete inner and outer hand brake cable for 105E car and estate models, outer cable front ferrule has 8cm long threaded section with two lock nuts, rear ferrule machined to accept horseshoe clip...
Handbrake lever rubber gaiter for 105E models (later type).
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
Complete inner and outer hand brake cable for 107E, outer cable front ferrule has 6cm long threaded section, rear ferrule has 15mm threaded section. Supplied with front and rear dust boots....
Brake shoe set (4 piece set), shoe measures 43mm wide, used on 1198cc 123E , also applicable to FRONT of: Bedford HA Van 6&8cwt HAE HAV 1970 onward Ford Cortina Mk1 1200 1962-64 Ford Escort...
Relined brake shoe set (4 piece set) used on 1198cc 123E , also applicable to Cortina Mk1 and Escort Mk1
Clevis pin commonly used on brake rods and brake cables fitted to the 8/10hp vehicles.
Dimensions 9/32" diameter x 3/4" long from underneath head to centre of the split pin hole.Overall length...
Dimensions 9/32" diameter x 3/4" long from underneath head to centre of the split pin hole.Overall length...
9/32" x 1-3/16" hardened clevis pin, connects brake compression tube to rear brake compensator.
9/32" x 1-3/16" hardened clevis pin, connects brake compression tube to rear brake compensator.
9/32" x 1-3/16" hardened clevis pin, connects brake compression tube to rear brake compensator.
Axle set of springs, pins and washers. Girling ref SP1006/2
Complete inner and outer hand brake cable for the 307E van range. The cable has two outer sleeves/conduit with a exposed inner cable in the centre, the exposed cable fits into the handbrake...
Front brake flexible hose for 105E & 307E models, 13" long (330mm) including threads.
Brake shoe roller for Model Y and Model C 1935 - 1937. Dimensions :- 19mm o/d, 8mm i/d, 5.8mm thick.
Pin brake shoe roller, head approx 11mm dia x 2mm deep. shaft 13mm long under head to pin hole shaft diameter 8mm.
Front & rear brake operating wedge for Model Y and Model C 1935 - 1937. Overall dimensions 55mm long x 47mm wide.
Fordson Thames Trader rear handbrake brake dust cover boot with metal base. Used on ET6, ET7, 504E, 500E, and left hand drive models. rubber boot measures 76mm wide, 85mm tall, mounting plate 55mm...
Re-lined axle set brake shoes (4 shoes), used front or rear with 10" brakes 1937-59. Exchange Item.
Axle set brake shoe linings (4 pieces) with rivets, all cars & 5cwt van 1937-59 with 10" brakes.
Good used brake expander plunger, used on all cars with 10" brakes 1937 onwards
Brake shoe retracting spring, dimensions overall length 150mm, coiled section 73mm long x 11mm diameter. 4 pieces required per axle.
Fits all models with 10" brakes 1937 - 1959 except E83W 10cwt...
Fits all models with 10" brakes 1937 - 1959 except E83W 10cwt...
Good used brake adjuster housing complete with adjuster wedge and plungers, fit all cars 37 onwards,
Good used brake adjuster wedge, threaded wedge which acts on the adjuster plungers 5/16 square on end.
Good used R/H brake adjuster plunger, fits between adjuster wedge and brake shoe.
Remanufactured L/H brake adjuster plunger, fits between adjuster wedge and brake shoe. EN16 steel heat treated.
Moulded part with metal base. Rubber boot 55mm x 31mm with a 6mm brake rod hole, base plate 95mm x 44mm with 8.5mm diameter holes, holes centres 75mm.
Front brake dust cover boot only, 56mm long x 32mm wide x 47mm tall, base flange 56mm x 42mm. 6mm hole for the brake rod.
Rubber concertinaed rear brake rod cover, overall length 58mm with 40mm diameter base, hole for the brake rod is 4.8mm.
Bush for handbrake cross shaft operating lever arm, 1938 onwards. 18.4mm long, 17.5mm o/d, 15.9mm i/d.
Front brake cross shaft, fits into pedal bracket assy and operates brake rod levers, LHD 10" rod brakes 1937-38.
Clevis yoke end, threaded 1/4" UNF. Hole for 9/32" diameter pin. 39mm long overall.
Centre brake rod support bracket, supports rod between brake cross shaft bracket and rear brake compensator.
Metal bracket 100mm long with two 6mm holes (25mm centres) x 22mm wide with oval...
Metal bracket 100mm long with two 6mm holes (25mm centres) x 22mm wide with oval...
Rear brakes lever assy, connects brake operating rod to rear brake cables 1937 on
Bush for rear brake compensator lever assy, (7W-2560-A) 1937on, 12.8mm lonx, 12mm o/d, 9.5mm i/d.
rear brake cross rod/cable link assy, supports rear brake cross lever.
rear brake lever bar, bar for rear braker lever assy (7W-2563-A)
Front brake cable (short) right-hand on RHD, left-hand on LHD. steel braided cable with eyelet to connect to brake expander and threaded stud for the celvis yoke connection.
Dimensions :- Overall...
Dimensions :- Overall...
Front brake cable (long) left-hand on RHD, right-hand on LHD. steel braided cable (31cms sheathed with rubber) with eyelet to connect to brake expander and threaded stud for the celvis yoke...
Rear brake cable (short) right-hand, steel braided cable with eyelet to connect to brake expander and threaded stud for the celvis yoke connection.
Dimensions :- Overall length 41.5cms with 7mm...
Dimensions :- Overall length 41.5cms with 7mm...
Rear brake cable (long) left-hand, steel braided cable with eyelet to connect to brake expander and threaded stud for the celvis yoke connection.
Dimensions :- Overall length 62cms with 7mm...
Dimensions :- Overall length 62cms with 7mm...
handbrake outer cable clamp, fits into the end of E62A-2811 pistol grip handbrake lever and holds the outer handbrake cable in place allowing inner handbrake cable to operate.
Inner and outer handbrake cable assembly for all upright models 1938 - 1959.
Please note that standard thread where the cable attaches to the linkage is 1/4"UNF thread, however some vehicles have...
Please note that standard thread where the cable attaches to the linkage is 1/4"UNF thread, however some vehicles have...
Inner and outer handbrake cable assembly for all upright models 1938 - 1959.
Please note that standard thread where the cable attaches to the linkage is 1/4"UNF thread, however some vehicles have...
Please note that standard thread where the cable attaches to the linkage is 1/4"UNF thread, however some vehicles have...
Inner and outer handbrake cable assembly for all upright models 1938 - 1959.
Please note that standard thread where the cable attaches to the linkage is 1/4"UNF thread, however some vehicles have...
Please note that standard thread where the cable attaches to the linkage is 1/4"UNF thread, however some vehicles have...
clutch pedal and hand brake lever to rear link clevis pin, with shaped top to attach a return spring, overall length 34mm, clevis shank to split pin hole centre 19mm, diameter 7mm.
plunger with stud, 15mm diameter x 19mm deep with 19mm diameter flange, thread 1/4 unf.
threaded clevis yoke brake compression unit 1937-38, 10" brakes with rods.
new front brake cross rod lever repair shaft, new shaft manufactured to fit into the 7WF-2557-B brake lever base, overall length 102mm x 9.45mm dia, machined to press fit into base (8.75mm) with...
rear brake camshaft dust ring, fits between camshaft and housing keeps excess dirt out
Brake rod support bracket (YE-2503-C) rubber grommet (two per bracket).
Dimensions :- 70mm long x 33mm wide x 14mm thick, two 12mm diameter brake rod holes at 38mm centres.
Dimensions :- 70mm long x 33mm wide x 14mm thick, two 12mm diameter brake rod holes at 38mm centres.
Brake shoe return spring used on 1934 to 1937 model Y and C.
Overall length 143.5mm, diameter 12.5mm. 4 springs required per axle.
Overall length 143.5mm, diameter 12.5mm. 4 springs required per axle.
Re-lined axle set brake shoes (4 shoes), used on Model C 1934-37. Exchange Item.
axle set brake shoe linings (4 pieces) with rivets, Model Y & C 1934-37.
front brake operating pin. approx 132mm long - ball shape to one end, cup shape to other.
rear brake double camshaft lever, right hand 34-37, dimensions 80mm long, fits on 13mm shaft, receives 9/32" clevis pin. fabricated replacement part.
rear brake double camshaft lever, left hand 32-33, dimensions 80mm long, fits on 13mm shaft, receives 9/32" clevis pin. fabricated replacement part.
Prices shown include VAT @ 20% where applicable
