Air filter paper element -round - Ford alternative part reference 109E-9601-D. Also equivalent to other manufacturer part numbers: BMC Austin 1H11334 , 12H2088 Vauxhall Bedford 7955266 David Brown...
910.4288
249 search results found for "105e"
We offer this new two piece exhaust system made from good quality mild steel
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This product incurs the oversize...
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This product incurs the oversize...
845.6207
Rear window weatherstrip rubber, one piece moulded part.
845.6207
Front window windshield weatherstrip rubber (with flap lower corners) one piece moulded part.
844.2498
New manufactured clutch centre plate, 7 1/4" diameter.
843.95825
refurbished item with new cartridge fitted, exchange item,
we can offer strut repair inserts, please see our 105E-5432-RK
we can offer strut repair inserts, please see our 105E-5432-RK
843.9245
New made, chrome plated saloon rear lamp housing - with bulb holders
843.6724
Ford 105E re-conditioned clutch pressure plate, exchange item.****We must receive your serviceable core item before we despatch a reconditioned unit****
843.3388
Ford 105E horn push button centre badge, 5 star on a red background in a knurled silver ring, 53mm overaul diameter, with a 43.5mm diameter boss on the back.
New plastic moulded part, hand...
New plastic moulded part, hand...
843.33325
set of piston rings. available in sizes listed
Standard size
Standard size
842.908
set of piston rings. available in sizes listed
oversize 0.045"
oversize 0.045"
842.908
set of piston rings. available in sizes listed
oversize 0.020"
oversize 0.020"
842.908
set of piston rings. available in sizes listed
oversize 0.030"
oversize 0.030"
842.908
set of piston rings. available in sizes listed
oversize 0.040"
oversize 0.040"
842.908
set of piston rings. available in sizes listed
oversize 0.060"
oversize 0.060"
842.908
Reprint of Ford Anglia full workshop manual covering models 105E, 123E, 307E, saloon, estate and van. Some parts are also applicable to model 107E. Plenty of comprehensive information, including...
751.0547
Reprint of full Enfo parts list with illustrations for the 105E/123E/307E range 1959 to 1968. covers all models. reproduced by kind permission of Ford Motor Company, UK no VAT on books and...
750.13196
Rear window glass rubber (glazing rubber), supplied with chrome effect filler locking strip, for estate (station wagon) rear door. note that this part is supplied in a cut length off the roll.
750.0065
New timing chain camshaft sprocket, 34 teeth with timing mark.
749.7548
Bonded metalastic gearbox mounting for the 105E also used Consul, Zodiac & Zephyr 1956-1962.
Dimensions of mounting block 91mm x 68mm, mounting base 88mm x 82mm with 66mm hole centres, height...
Dimensions of mounting block 91mm x 68mm, mounting base 88mm x 82mm with 66mm hole centres, height...
738.26013
We offer a new two piece exhaust system made from good quality mild steel
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This product incurs the oversize...
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This product incurs the oversize...
634.8785
Front outer taper roller wheel bearing, Fits 8/10hp cars & 100E.
Dimensions 41.3mm o/d x 16mm i/d x 14.7mm wide.
Dimensions 41.3mm o/d x 16mm i/d x 14.7mm wide.
280.1627
Front wheel outer taper roller bearing, 105E-1216-A and 105E-1217-A Fits:- Prefect 107E (eng no 218338 onwards) Anglia 105E Cortina Mk1 up to Nov 1964
266.84662
Moulded grommet for rear side window on saloon. Offered in black 105E-7030263-A or grey 105E-7030263-B
257.8991
Moulded grommet for rear side window on saloon. Offered in black 105E-7030263-A or grey 105E-7030263-B
257.8991
Moulded grommet for rear side window on saloon. Offered in black 105E-7030263-A or grey 105E-7030263-B
257.8991
for use in 105E/123E engine, also on E93A and 100E Aquaplane head
229.10336
Copper brake pipe kit, to fit 105E/123E/307E/309E estate/van models 1961-67
227.3046
Taper roller inner front wheel bearing assy. Fits :- 100E & 300E with 1.000" dia stub Prefect 107E Anglia 105E & 307E Cortina Mk 1 1963-66
222.5838
Handbrake lever rubber gaiter for 105E models (later type).
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
Dimensions :- Base 175mm x 70mm wide with six fixing holes, 75mm tall with 26mm x 8mm slot for handbrake lever.
220.02028
Set of 5 pre-cut HT leads for the Ford 105E engine, complete with sparking plug caps & trimmed ready for fitting to coil/distributor.
Please note the spark firing order 1-2-4-3 (1 is the...
Please note the spark firing order 1-2-4-3 (1 is the...
219.8452
Grey rubber speedo cable grommet for where the speedo cable passes through the body, please note that this grommet needs to be split to get it over the cable, dimensions 30mm diameter x 11mm...
219.65785
Differential taper roller bearing assy,
Fits:-
Prefect 107E
Anglia 105E
Consul Classis 315
Consul Capri
Cortina Mk1
Fits:-
Prefect 107E
Anglia 105E
Consul Classis 315
Consul Capri
Cortina Mk1
219.38513
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Reconditioned exchange unit - saloon rear right 105E-18050-A, saloon rear left 105E-18051-A, estate rear right 105E-10850-B, estate rear left 105E-10851-B, panel van rear right 307E-18050 or panel...
219.21611
Fuel pump to block paper gasket, overall dimensions 58mm tall x 70mm wide with 43mm hole centres. used on the 105E steel top fuelpump and the 109E glass bowl fuel pump.
218.79785
Copper brake pipe kit, to fit 105E/123E saloon models 1959-67, extra pipe supplied for 65-67 models that fits between rear junction and rear brake hose.
218.75919
Differential pinion taper roller bearing assy, Fits:- Prefect 107E Anglia 105E Consul Classis 315 Consul Capri Cortina Mk1
218.61629
Rear wheel brake cylinder, alloy body, plain end to piston, used on 105E 997cc models and Cortina Mk1, Girling ref 64673049
218.55896
Complete inner and outer hand brake cable for 105E car and estate models, outer cable front ferrule has 8cm long threaded section with two lock nuts, rear ferrule machined to accept horseshoe clip...
218.35912
Set of 8 pieces valve tappet. Standard head diameter - 21.5mm.
For smaller headed version (20.3mm) for GT camshafts - see 105E-6500-B
For smaller headed version (20.3mm) for GT camshafts - see 105E-6500-B
218.26494
Sealed bearing supplied with 105E-1180 retainer. Fits:- all 107E, 105E range through to september 1966, Cortina Mk1 1962-66, Consul 315 1961-64 Consul Capri 1961-64, Corsair 1963-70. dimensions...
218.0584
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
217.89532
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
measures...
measures...
217.89532
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
measures...
measures...
217.89532
105E type inlet valve. 97.50mm long, head diameter 32.00mm, offered with standard stem (nominal 5/16") ,and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
measures...
measures...
217.89532
Clip "Ford type" for weatherstrip, fits into side slot ( side tag 4mm wide x 8mm long). dimensions approx 16mm long, 13mm high, gripper width max 2.5mm.
217.2508
Front hub oil seal, stops grease and oil contaminating the brake shoes.
Used on 100E between 1959-62 with 1.00" stub axle. also used on all 105E and Mk1 Cortina 09/62 to 10/64 not GT or Lotus....
Used on 100E between 1959-62 with 1.00" stub axle. also used on all 105E and Mk1 Cortina 09/62 to 10/64 not GT or Lotus....
217.24487
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter
217.24487
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter...
217.24487
105E type exhaust valve. 97.50mm long, head diameter 30.15mm, offered with standard stem (nominal 5/16"), and oversize stem of 0.003" (approx 0.076mm) and 0.015" (approx 0.38mm) diameter...
217.24487
Conrod little end bush. please note that this will require final ream and hone to suit piston pin once pressed into place, dimensions 26.5mm long, 22.4mm o/d, 20.4mm i/d.
217.04855
Inner wing wiring grommet, for headlamp and wing lamp wires where they pass through the inner wing, grey rubber oval tube grommet, hole through the centre is 14mm x 9mm, overall length 38mm, fits...
216.92549
Bonnet buffer rubber, 'L' shaped black rubber bonnet stop, fits into the upper inner wing, onto which the bonnet rests, dimensions, footprint 26mm x 24mm, height 19mm and fits a 10mm panel hole.
216.92549
Steering column opening cover floor gasket, 167mm long x 69mm wide with 22mm hole.
216.72325
Bulkhead wiring loom grommet, for main wiring harness where it passes through the body, grey rubber tapered grommet with an 11mm hole through the centre, fits a 22mm panel hole, overall diameter 33mm.
216.72325
rubber grommet seal for carburetor to air cleaner. measures approx 58mm inside x 25mm deep
216.72325
rubber pad, o/d 26mm i/d 14mm, thickness 3mm.
216.72325
Rear red lower lens for estate model, marked A2G61
216.59174
Brake pedal rubber pad, 67mm tall, 55mm wide at top tapering down to 41mm.
216.47562
Clutch pedal rubber pad, 67mm tall, 55mm wide at top tapering down to 41mm.
216.47562
Armstrong reference 7426, studs approx 130mm centres.
216.4712
Alloy inlet manifold for fitting twin SU carburetors to 105E and 307E models. Weight approx 0.69kg
216.37834
replacement cylinder liner sleeve for engine block.
specifically sized for use once +90 thou oversize has been reached.
84.21mm outside
specifically sized for use once +90 thou oversize has been reached.
84.21mm outside
216.13754
bush (rear spring shackle), dimensions:- overall length 1 3/8", main body 15/16" long x 3/4" dia with 3/8" hole through the centre
216.13754
aluminium water connection - outlet - thermostat housing, dimensions :- base 92mm x 66mm with 73mm hole centres, overall height 60mm, accepts 38mm bore hose.
216.13754
Rubber bonded steel engine mount. hole centres to chassis 65mm side to side, 58mm top to bottom, engine hole centres 38mm.
215.87146
moulded part weatherseal for front opening quarter window on door. supplied in pair only.
215.75433
Rear spring bush kit, comprising 8 rubber bush for rear spring and hanger and 2 front Silentbloc type bush
215.75433
chrome plate name plate with red ANGLIA infill badge for mounting on to radiator grill panel (under bonnet panel). although NOT original part it is a good remake. we offer the this with a moulded...
215.75433
Front indicator lamp lens gasket, lens to lamp body.
215.42903
Front suspension upper mount through which the top of the suspension strut passes. Overall dimensions 113mm diameter (at flange) x 62mm tall, with three captive M8 studs on top. Supplied complete...
215.42903
moulded rubber part, black. shaped slot 32mm x 8mm at widest. base overall 58mm x 34mm approx, fits into panel hole approx 43mm x 19mm. sold each.
note photo shows front and rear views for...
note photo shows front and rear views for...
215.42903
New old stock shaft (rocker arm) assy, for the Ford O.H.V. engines 1961 onwards fits 997cc, 1200cc,1300cc,1500cc & 1600cc. overall length 376mm.
215.42903
For the FoMoCo carburettor, includes gaskets, diaphram etc
215.42903
front right hand lens clear (triangular shape) marked A-FP1-59
215.42903
rear amber top lens for estate model, marked A2H61.
215.29752
rubber elbow to connect ventilator outlet tube to engine. fits other models outside our range.
215.22102
Replacement universal joint supplied with four circlips
215.22102
Water pump. also fits later models. Quinton Hazell reference QCP181. dimension from block face to pulley 3.33 inch, pulley hud diameter 0.79 inch. application also: Ford Escort 1100 1300 & Gt...
215.22102
Distributor cap (side outlet) for Lucas distributors, part ref DDB101 which replaces Lucas 54412472 and also Lucas 422905.
215.1814
New re-manufactured 2nd and 3rd gear synchronizer hub and cone assembly. Supplied with three keys and two spring clips
215.1814
New, re-manufactured timing chain crankshaft sprocket, 17 teeth with timing mark.
215.1814
rear amber top lens for saloon model, marked A-R1-59
215.17699
Fuel tank filler pipe to tank boot floor rubber grommet. Saloon only. overall dimensions 105mm x 92mm,
215.17699
camshaft lock washer, dimensions 58mm x 38mm with 35mm hole centres.
215.01877
Fit in the end of the gearbox extension, preventing oil leakage, 44mm o/d x 30.5mm i/d x 14.75mm deep
215.01877
front suspension track control arm to roll bar(stabilizer) outer bush 4 per vehicle.
214.84332
Cartridge insert for repair of front McPherson strut. will also suit Cortina mk1 and Classic Capri. Approx 413mm long. Supplied with top nut. Note bare weight 2.75kg
214.84332
Silentbloc bush 28.6mm outer diam x 9.5mm inner diam, 55.7mm inner length, 51.6mm outer length
214.84062
Refurbished track control arm L/H - Exchange item,
214.84062
Refurbished track control arm R/H - Exchange item
214.84062
new made outside door handles - offered as one each left and one right side of vehicle. without locking device - you fit your own old device. sold in pairs only.
214.84062
Re-manufactured chrome plated casting for front side lamp (park lamp) and front flasher. We supply these in pair (car set) for you to transfer your lens and bulb holder etc.
214.84062
Plain top, later style hub cap.
Approx. 238mm overall diameter. inside edge approx 226mm.
Approx. 238mm overall diameter. inside edge approx 226mm.
214.6091
Extra strong valve spring set (8 pieces) - approx dimensions 38.5mm tall, 28.5mm diameter, 4mm wire.
214.593
New, re-manufactured timing chain camshaft sprocket, 34 teeth with timing mark.
214.593
wing/grill side light lens gasket, lens to lamp.
214.58858
wing/grill side light gasket, lamp to body.
214.58858
oil filter kit to enable the fitting of modern spin off oil filter in place of the original paper element unit on earlier oil pumps. this assembly bolts on into existing holes in the engine and...
214.41257
Will have to be heated, then allowed to shrink onto the flywheel fits lotus twin cam
214.375
Metal top fuel pump used 1959 - 1960 early models.
PLEASE NOTE – When breaking apart and re-assembling compression fittings on copper pipework that feature a brass olive, you need to fit a...
PLEASE NOTE – When breaking apart and re-assembling compression fittings on copper pipework that feature a brass olive, you need to fit a...
214.375
interior mirror with clamp socket to accept 12.5mm ball on arm/stalk. plastic finish available in grey. size - grey 61mm x 151mm new old stock, slightly bad silvering on mirror edges.
214.0718
new made outside door handles - offered as one each left and one right side of vehicle. with new key locking device fitted. sold in pairs only. see alternative listing without key device
214.0718
Drag link assembly for right hand drive vehicle. Supplied with replacement E20-LB-1 idler bush. Centre mount bolts spaced approx 257mm.
214.0718
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
set of 4 pistons complete with rings, pins, clips etc. available in various over sizes.
213.82416
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
replacement bearing shell set for crankshaft main bearings, specify size required. normal sizes suit crankshaft re-grinds of standard, less 0.010", less 0.020", less 0.030", also less 0.040" to a...
213.7866
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
213.7866
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
213.7866
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
213.7866
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
213.7866
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
213.7866
crankshaft thrust washer (2 piece set - upper and lower) supplied in plus 0.0025" (plus 2.5), plus 0.0050" (plus 5.0), plus 0.0075" (plus 7.5) and plus 0.0100" (plus 10). (please note that 0.010"...
213.7866
Dynamo / generator 12 volt. New made part (not refurbished)
213.72455
Starter motor - newly manufactured part, not refurbished. Mounting bolt hole centres 4.5" apart on flange, starter comes with a two bolt fixing flange which suits other models.
213.72455
single width timing chain with link -application also Escort 1100 or 1300, Cortina Mk1 1300 or 1600, Capri 1300 or 1600, Consul Classic Capri, Corsair 1500, Cortina Mk2 1300, 1500 or 1600ohv,...
213.72455
Timing cover oil seal, front crankshaft seal. Dimensions - 52.48mm o/d x 35mm i/d x 8mm thick.
213.72455
suits bowl 115mm long. filter element 85mm tall, centre hole approx 21mm. other applications for Ford: Cortina Mk1 to Aug 1962 Cortina Mk1 1200 (113E) to Oct 1964
213.72455
approx 72.5mm outside, 38mm inside (metal 7.4mm thickness)
213.72455
Dimensions approx 66mm outside, 35.3mm inside x 15.6mm thick
213.72455
Set of 8 pieces valve tappet. Smaller head diameter - 20.3mm - for GT camshaft
213.13615
Brass synchro blocking ring (baulk ring)
Fits:-
Consul 315
Consul Capri
04/61 to 07/62
Fits:-
Consul 315
Consul Capri
04/61 to 07/62
211.58095
pre crossflow / Crossflow timing cover gasket
Ford OHV 1.0/1.1/1.3/1.5/1.6
Ford OHV 1.0/1.1/1.3/1.5/1.6
211.58095
12 volt 22A voltage regulator/control box with Lucar push-on terminals. Size approximately 85mm x 80mm x 95mm tall. black. 2 bobbin type. Equivalent to Lucas Part Numbers NCB101 and RB106....
211.31883
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.
208.48454
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.
standard outer - under size inner 0.002" or 0.010" limited...
standard outer - under size inner 0.002" or 0.010" limited...
208.48454
three part camshaft bearing set. standard bore inner, standard size outer. this part is used through later model engines also.
208.48454
black on aluminium, diagonal format, blank chassis commission plate, used until December 1964
204.80197
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
8/10hp 1937 onwards
8/10hp 1937 onwards
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
8/10hp 1932-34
8/10hp 1932-34
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
fits D33 - C575 dynamo
fits D33 - C575 dynamo
200.79375
Two, three and four brush dynamo and starter brush sets.
100E & 105E
100E & 105E
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
8/10hp 1932-37
8/10hp 1932-37
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
as Lucas 54212257
as Lucas 54212257
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
8/10hp 1935-40
8/10hp 1935-40
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
Applications include Morris Eight Series E, M10/4 Series 3 and Series M
Applications include Morris Eight Series E, M10/4 Series 3 and Series M
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
Lucas ref 238061 . fits C45 C40 dynamo
Lucas ref 238061 . fits C45 C40 dynamo
200.79375
Two, three and four brush dynamo and starter brush sets.
Equivalent to the Lucas 255659 set - applications include Morris Eight Series E and M10/4 Series 3
Equivalent to the Lucas 255659 set - applications include Morris Eight Series E and M10/4 Series 3
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
200.79375
Two, three and four brush dynamo and starter brush sets.
8/10hp 1940 onwards
8/10hp 1940 onwards
200.79375
Two, three and four brush dynamo and starter brush sets.
100E
100E
200.79375
Distributor low tension lead assembly with points wire and Lucar wiring connector. Replaces Fod part number 105E-12049-A. Also equivalent to Lucas part number 54413549 for 22D6 and 22D4...
176.98383
6 volt single contact BA15s 21 watt. Dimensions 24mm wide x 48mm tall with 15mm diameter cap, use brake & indicator. For LED options please see B317LEDW, also red and amber versions B317LEDR...
160.06839
New/Old unused Delco Remy (1867781) 6 volt Voltage cut out, saddle bracket supplied for dynamo fitment.
156.1991
12 piece kit comprising 4 piece 105E-3096-A and 8 pieces 105E-3063-A. Also applicable Classic Capri 315 109E & 116E.
152.12158
Cylinder head gasket set 105E, also CORTINA MK1 1200 AND 1500
151.47836
Front brake flexible hose for 105E & 307E models, 13" long (330mm) including threads.
135.92334
New made replacement rear lever arm shock absorber - sold outright
134.56133
New made replacement rear lever arm shock absorber - sold outright
134.56133
black on aluminium, rectangular, blank chassis commission plate used January 1965 onward.
134.56133
Lucas RB340 type. Three bobbin.12V 22A Dynamo Voltage Regulator with Lucar terminals. Equivalent to Lucas part number NCB130, NCB132 (the uprated version of 11A NCB134/NCB136). E - earth, D -...
133.5073
12 volt double contact BA15d 21 watt. dimensions 24mm wide x 48mm tall with 15mm diameter cap, use stop or flash. For LED options please see B335LEDW and B335LEDWW
For a much...
For a much...
132.38013
12 volt 22A Voltage regulator/control box with screw terminals. Size approximately 85mm x 80mm x 95mm tall. Black. 2 bobbin type. Equivalent to Lucas Part Numbers RB106 and NCB100. Mechanical unit...
129.41902
New made 6 volt cut out regulator unit as Lucas RB106 type, 5 screw terminals, 2 bobbin, size approx 85mm x 80mm x 95mm tall.
129.41902
Distributor body main bush, fits in the main body of the distributor through which centre drive rotates, two bushes per distributor, 21mm long, 12.4mm inside diameter, 15.9mm outside diameter.
128.29187
'Chrome' finish plastic windscreen filler/locking strip, available separately for our RM47 screen rubber and 105E-7942084 105E estate rear tailgate screen rubber.
Dimensions :- 11mm wide x...
Dimensions :- 11mm wide x...
124.459816
12 volt single contact BA15S 21 watt. dimensions 24mm wide x 48mm tall with 15mm dia cap, use stop or flasher. For a brighter incandescent version of this bulb please see B337B. For a halogen...
122.76408
Electrical temperature sender sensor unit, lucar terminal. thread approx 3/8" (10mm) outside. used 105E engine. Colour coded Blue.
114.9125
AC repair kit BD6, body approx 80mm diameter. suits larger export E93A pump and glass top 105E fuel pump.
114.04335
Sealed bearing supplied with 105E-1180 retainer. application 105E range from september 1966 onward, all Escort Mk1, Cortina Mk1 and Capri Mk1 to september 1969. dimensions outer case diameter 62mm...
110.01519
Camshaft to camshaft sprocket dowel, dimensions 15mm overall length (4mm long major diameter, 11mm minor diameter), 6.4mm minor diameter and 8mm diameter shoulder.
Fits 109E-6250 camshaft for pre...
Fits 109E-6250 camshaft for pre...
99.531715
57-, alloy body, plain end to piston. used later 100E/300E, all 107E and 1198cc 105E/307E models. Girling ref 64673476. also applicble to Escort Mk1 and Cortina Mk1
99.51309
Electrical temperature sender sensor unit, lucar terminal. thread approx 5/8 (15.6mm) outside. used on Upright, 100E and some 105E engines. Colour coded Red.
99.48648
Clutch or brake pipe. 100E & 300E used on front brakes, rear brake flexi and clutch slave cylinder,107E used on front brakes and rear brake flexi, 105E rear brake flexi only.
87.96123
Larger 1/4" thick (approx 6mm) spacer for fuel pump mounting, fitted to post war up-rights, as well as 107E, 105E and 307E, overall dimensions 63mm wide x 55mm tall.
84.18987
Pre-crossflow and crossflow cam shaft with wider lobe machined from billet steel. Later camshaft with the offset locating dowel, supplied with 105E-6256-B later sprocket - with two bolts part...
81.659
Clutch slave cylinder fitting the following classic Ford models; 1959 - '68 Anglia 105E, 123E, 307E, 309E van and estate. 1962- '66 Cortina MK1 1200, 1500 ( NOT Lotus models) 1963 - '65 Ford...
64.8697
We offer new two piece exhaust system made from good quality mild steel
42mm clamp required for front pipe to silencer (clamps supplied separately)
This product incurs the oversize...
42mm clamp required for front pipe to silencer (clamps supplied separately)
This product incurs the oversize...
56.439934
distributor cap for late 105E model 1965 on. push in connections. also fitted to Ford Fiesta 1976 on, Ford Escort 1100/1300 1971 on, Ford Escort, Mexico, RS1800, RS200 1970 on, Corsair (1966-70),...
55.48766
Replacement plastic moulded side trim moulding clip/rivet, for fixing body moulding strips to vehicle side. to fit trims with 5.25mm gap (measurements on larger image). this clip is a moulding...
55.197212
Contact set / ignition points set for late distributors on 105E model 1966 to 1968. Lucas type DSB753. As part reference Ford part 681F-12107-AA, Motorcraft EDP1, Ci ref CS110. Also application...
54.725487
upper door sponge seal - which you glue to the door surround - for ONE door note that the original sponge door seal surround was a one piece item, the cross section differs from the top to the...
52.69534
Remanufactured aluminium gear box bell housing/clutch cover to the Wooler pattern. This enables the fitting of a 4 speed 105E Anglia type gearbox to a 100E engine. This was a period part to...
52.418274
New manufactured unit. Applications include Ford 105E models 1961 onward, Classic 315, Classic Capri, Cortina Mk1, Corsair to 1965, Morgan 4/4 Series III/IV/V 1960 to 67.
PLEASE NOTE – When...
PLEASE NOTE – When...
47.951958
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
Ford Anglia and Prefect 105E, 106E, 107E, 108E and 307E replacement bearing shell set for piston to crank connecting shaft (see fitments below). Specify size required. normal sizes suit crankshaft...
47.6776
We offer this new two piece exhaust system made from good quality mild steel, for 1198cc application
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This...
42mm clamp required for front pipe to silencer, (clamps supplied separately)
This...
46.041718
Relined brake shoe set (4 piece set) used on 1198cc 123E , also applicable to Cortina Mk1 and Escort Mk1
45.401695
Retaining circlip for clutch slave cylinder, approx 25.7mm ID
45.401695
